II. STANDARDS AND ADJUSTMENTSA. Image Adjustment1. Adjusting the Leading Edge MarginSelect ‘LE_BLANK’ in service mode ( ).Make adjustments so that the leading edge non-image width is 4.5±1.5 mm when theTest Sheet is copied in Direct.(unit: 0.1 mm)Figure 10-2012. Adjusting the Leading Edge Non-Image Width (registration)Select ‘REGIST’ in service mode ( ).Make adjustments so that the leading edge margin is 4.5±1.5 mm when the TestSheet is copied.(unit: REGIST:0.1mm)Figure 10-2023. Adjusting the Left/Right Registration (paper deck and cassette position)Make adjustments by moving the horizontal adjusting plate of the paper deck andeach cassette so that the distance between the edge of the copy image and that of thecopy paper is 0 ±1.5 mm when the Test Sheet is copied.Figure 10-2030–1.5mm0246810(+)(-)4.5–1.5mm]3]4.5–1.5mm]3]COPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 10 TROUBLESHOOTING10-5
