B. Exposure System1. Adjusting the Scanner Home PositionMake copies, and remove the control panel; then, check to make sure that the linein section A on the electrode (front) of the No. 1 mirror mount is within section B of thehole in the glass support (front).Otherwise, change the setting of ‘BRAKE_SC’ in service mode ( ) so that theline in section A is within section B.Figure 10-208BNo. 1 mirror mountElectrode mount (front)A (left) of wallGlass support(front)Hole]3]COPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 10 TROUBLESHOOTING10-10
