N. Separation Claw/Separation Claw Drive Assembly1. Removing the Separation Claw/Separation Drive Assembly from the Drum Unit1) Remove the process unit from the copier. (See p. 7-17.)2) Remove the screw q, and remove the No. 2 heat insulting plate w.3) Remove the screw e, and remove the claw holder r.Figure 4-3561. Take care not to bend the separation claw.2. Take care not to damage the photosensitive drum.e erqwCaution:COPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 4 IMAGE FORMATION SYSTEM4-65
