2) Remove the three flat cables e (J912, J913, J916) of the control panel CPU PCB,and disconnect the connector r (J956) of the inverter PCB.3) Remove the five mounting screws t, and remove the touch panel y.Figure 7-4254. Removing the Control Panel CPU PCB1) Remove the five mounting screws q, and remove the control panel right supportplate w and the control panel CPU PCB e.Figure 7-426qqweer ttyCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-25
