8) Hold the grip of the process unit as shown Figure 7-413, and remove it.Figure 7-4137. Installing the Process UnitInstall the process unit by reversing the steps used to remove it while keeping thefollowing in mind:1) Place the process unit while aligning it along the front and rear guide plates q of theleft rail.For the right rail, be sure to place the process unit on the L-shaped stay.Figure 7-414 (rail side)qRight handLeft handCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-19
