H. Holding Tray Feeding Assembly1. Removing the Holding Tray Feeding Assembly from the Copier1) Open the front cover, and slide out the holding tray feeding assembly to the front.2) Remove the three mounting screws q, and remove the holding tray feeding frontcover w.Figure 5-8973) Remove the five mounting screws e and the two metal fixings r; then, remove theholding tray feeding assembly t from the rail.Figure 5-898eeeeer rtq qwCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-103
