6) Remove the two mounting screws q, and remove the lower separation clawassembly w together with the support plate.Figure 6-2267) Remove the tension spring, and remove the lower separation claw assembly.13. Removing the Lower Roller1) Slide out the fixing/feeding unit from the copier.2) Remove the fixing/feeding front cover.3) Remove the flywheel.4) Remove the fixing cleaning belt and fixing upper cover; then, clean the silicone oilpan.5) Remove the upper roller assembly of the fixing assembly.6) Remove the lower separation claw support plate.7) Remove the lower roller q from the fixing assembly, and remove the two E-rings wfrom the lower roller; then, remove the two bearings e.Figure 6-227q ww e eqqwCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 6 FIXING SYSTEM6-29
