2. Orientation of the Separation Roller (cassette/deck)Keep the following in mind when replacing the separation roller.Figure 10-2263. Orientation of the Feeding Roller (cassette/deck)When installing the feeding roller assembly q to the cassette/deck pick-upassembly, make sure that the belt pulley w is toward the front of the machine.When installing the feeding roller e to the feeding roller shaft r, make sure that themarking ‘5’ t is toward the front of the machine.Figure 10-227w qr55etFront (copier)Wider groove Narrower groove(front of copier)(rear of copier)COPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 10 TROUBLESHOOTING10-22
