VarName R/W Type DescriptionTraceSensitivity R/W double Defines the trace accuracy (in rad)if the polarimeter is in the Tracemode. A value of 0 will storeevery data point. Values greaterthan 0 will only store data if theSOP has moved by more thanTraceSensitivity.TrigSenseAngle R/W double Configures the SOPChange triggermode. An event is generated ifthe SOP has moved by more thanTrigSenseAngle (in deg) within thetime indicated by TrigSenseTime.TrigSenseTime R/W double Defines the time interval obe-served in SOPChange triggermode. A value of 0 indicates thatTrigSenseAngle is relative to thelast event. I.e. An event is createdif the SOP has moved by more thanTrigSenseAngle compared to thelast event (regardless of the time).11.7 Target PolControllerThe target name PolCon* will select the first polarization controller in-strument from the browser tree.The following commands are available:ManualCommands:Activates Manual Mode of the InstrumentScrambleActivates Scrambling Mode of the InstrumentSequenceActivates Sequence Mode of the InstrumentRandomizeLoads a new random sequence in scrambling modeStabilizeActivates Stabilization Mode of the InstrumentVariables:92 A1XXX/A2XXX/A3XXX User Guide
