8.6.2 MIP PolarimeterMeasStateThis VI is used to get information about the current measurement stateof the device.Input parameters: Device descriptorOutput parameters: Device descriptor, number of samples, trig-ger state, measure statenSamples• Number of samples availableTriggerState• IDLE (no measurement)• ARMED (measurement initialized, waiting for trigger)• SAMPLING (measurement in progress)• DATAAVAILABLE (measurement completed)• ERROR (error occurred)MeasState• Measurement error code (see Error Codes (section 15.3) )8.6.3 MIP PolarimeterMeasStartGetThis VI starts a measurement and waits for completion. Measurementparameter are stored in the variable tree structure prior to starting thisVI. The results of the measurement are returned either in a floating-pointor integer array, depending on the measurement mode. Currently onlyfloating-point data will be returned when measuring SOPs.Input parameters: Device descriptor, measurement modeOutput parameters: Device descriptor, float results, short re-sults, number of samples, rows, error codeMeasurement mode• See MIP PolarimeterMeasStart (section 8.6.1) .FloatTab/ShortTab70 A1XXX/A2XXX/A3XXX User Guide
