UNIX TCP/IP245• To display a printer named fxPS in long format, enter the following command:%lpq -PfxPS -l-C OptionOn SunOS, the -C option can be used to specify the print format if the machine printswith the PostScript language in spool mode.This section explains the functions which can be specified and printing operationswhich will be affected using the -C option.NOTE: When the PostScript logical printer that was configured using CentreWareInternet Services and the -C option have been specified simultaneously, some of theactions cannot be guaranteed to work. Also, when specifying the PostScript logicalprinter as a default printer on UNIX, it is recommended not to use the -C option.FunctionThe following items can be set up using the -C option.Selecting a paper trayWhen selecting a paper tray, specify either a paper size or a tray. If the paper size isspecified, the machine automatically searches and selects the tray.The following parameters can be specified.Parameter DescriptionINTRAY1/intray1 Selects Tray 1.INTRAY2/intray2 Selects Tray 2.INTRAY3/intray3 Selects Tray 3.INTRAY4/intray4 Selects Tray 4.INTRAY5/intray5 Selects Tray 5 (manual feed).INMF/inmf Selects Tray 5 (manual feed).A3/a3 Selects the tray which has A3 (297 × 420 mm/11.7 × 16.5inches) paper loaded.B4/b4 Selects the tray which has B4 (257 × 364 mm/10.1 × 14.3inches) paper loaded.A4/a4 Selects the tray which has A4 (210 × 297 mm/8.3 × 11.7inches) paper loaded.B5/b5 Selects the tray which has B5 (182 × 257 mm/7.2 × 10.1inches) paper loaded.A5/a5 Selects the tray which has A5 (148 × 210 mm/5.8 × 8.3inches) paper loaded.LETTER/letter Selects the tray which has letter size (216 × 279 mm/8.5 ×11.0 inches) paper loaded.LEGAL/legal Selects the tray which has legal size (216 × 356 mm/8.5 ×14.0 inches) paper loaded.INHC/inhc Selects the High Capacity Tray.
