Xerox 5222 System Administration Manual

Also see for WORKCENTER 5222: Reference guide Service manual field

Contents

Xerox 5222 System Administration Manual Manual pdf 92 page image

6 Setups92SNMPSpecifies whether to enable the SNMP agent.FTP ClientSpecifies whether to enable the FTP Client port.Receive E-mailSpecifies whether to enable the mail receiving port.Send E-mailSpecifies whether to enable the mail transmission port.E-mail Notification ServiceSpecifies whether to enable the mail notification service.UPnP DiscoverySpecifies whether to enable the UPnP port, and specifies the port number.WSDSpecifies whether to enable the WSD port, and specifies the port number.Internet ServicesSpecifies whether to enable the Internet Services port, and specifies the port number.SOAPSpecifies whether to enable the SOAP port, and specifies the port number tocommunicate with external applications.WebDAVSpecifies whether to enable the WebDAV port, and specifies the port number andoperation time limit.Protocol SettingsThis feature allows you to configure the machine settings that correspond with theprotocol being used.1. Select [Protocol Settings] in the[Features] menu.2. Change the required settings.Use the scroll buttons to switchbetween screens.3. Select [Close].Ethernet Rated SpeedSpecifies the Ethernet port speed according to the network environment to which themachine is connected.TCP/IP - IP ModeSpecifies the IP operation mode. Selecting [Dual Stack] enables both IPv4 and IPv6communications.