Xerox 5222 System Administration Manual

Also see for WORKCENTER 5222: Reference guide Service manual field

Contents

Xerox 5222 System Administration Manual Manual pdf 249 page image

EtherTalk249EtherTalkThis section explains how to set up the machine to operate on an EtherTalk network.The following information is provided:Information Checklist – page 249EtherTalk Environments – page 249EtherTalk Installation – page 250Installation Procedure – page 250Network Communication Setup – page 250Computer Setup – page 250Test Print – page 251Information ChecklistBefore installing EtherTalk on the machine, make sure that the following items areavailable or have been performed.If problems are encountered during the machine installation, refer toProblem Solvingon page 341.EtherTalk EnvironmentsSystem configurationAs the machine supports EtherTalk protocol, you can print from a Macintosh.NOTE: You will need the optional PostScript Kit to use EtherTalk for printing.Target computersThe machine supports a Macintosh or Power Macintosh with the following OS:• Mac OS 7.5 or later, 8.x, 9.x, or Mac OS X 10.xItem ByAn existing operational EtherTalk network with Macintosh workstationsequipped with Ethernet network interface cards is required. Theseprocedures are not designed to install an EtherTalk network.CustomerMacintosh System versions 7.5 or later, 8.x, 9.x, or Mac OS X 10.x CustomerTest the machine to make sure that it is fully installed and functioningcorrectly.CustomerInstall the Adobe PS print driver, or PPD (optional). Customer