System Settings111Fax ControlThis feature allows you to conduct operational control of the various fax features.1. Select [Fax Control] in the[Features] menu.2. Change the required settings.Use the scroll buttons to switchbetween screens.3. Select [Close].Re-enter RecipientsSpecifies whether to re-enter a recipient address after once entering it, to reduce therisk of sending a fax to the wrong address. When [Enter Twice] is selected, you will beprompted to re-enter a specified address for confirmation.Re-enter Broadcast RecipientsSpecifies whether to re-enter Broadcasting recipient addresses after once enteringthem, or whether to enable or disable the Broadcasting feature itself. This setting iseffective when you select [Enter Twice] under [Re-enter Recipients].Re-enter Speed Dial RecipientsSpecifies whether to re-enter a recipient address after once specifying it using SpeedDial. This setting is effective when you select [Enter Twice] under [Re-enterRecipients]. Selecting [Re-enter Fax Number or E-mail] prompts you to manually re-enter a fax number or e-mail address for confirmation.Re-enter Group RecipientsSpecifies whether to re-enter group addresses after once entering them, or whether toenable or disable the group dialing feature itself. This setting is effective when youselect [Enter Twice] under [Re-enter Recipients], and also when you select [Enter OnceOnly] or [Enter Twice] under [Re-enter Broadcast Recipients].Transmission Header Text - PollingSpecifies whether to send header information when you send documents with the[Store for Polling] feature on the [More Fax Options] screen.Polled Documents - Auto DeleteSpecifies whether to automatically delete the document data for the [Store for Polling]feature on the [More Fax Options] screen from memory after the remote machine haspolled your document.Rotate 90 degreesSpecifies whether to determine to rotate the image before reducing the image size. Thissetting is effective when you select [Auto %] in the [Reduce/Enlarge] feature.Mixed Sized Originals Scan ModeSpecifies whether to scan non-standard size documents for fax or Internet Faxtransmissions. Selecting [Standard Size Mode] is recommended if you always scanonly standard-size documents.NOTE: When [Standard Size Mode] is selected, some areas of the images may belost in the following cases:
