Storing and Handling Paper23Storing and Handling PaperAlways use high quality, xerographic grade paper in the machine. Damaged, curled, ordamp paper can cause jams and image quality problems. Follow these simple rules tostore paper.• Store paper in dry conditions, away from extreme heat or cold, such as radiators oropen windows.• Store paper flat on a shelf or pallet above floor level.• Leave the paper wrapped and boxed until ready to be used.• Re-wrap partly used packages of paper.NOTE: Do not store paper in the paper trays.Supported Paper Sizes and TypesThis section lists the sizes and types of paper that can be used with the machine.Supported Paper SizesThe following table lists the paper sizes supported by each paper tray, output tray, andthe duplex module.NOTE: For the capacity of each tray, refer toAppendix on page 421.Standard SizesNOTE: The standard sizes of paper that can be detected vary depending on the papersize table specified by the System Administrator. For information on setting the papersize table, refer toPaper Size Settings in the Setups chapter on page 78.Paper Trays - Standard SizesPaper Size Dimensions(mm)LEF/SEFTray 1, 2/Tray 3, 4(Two TrayModule)Tray 3, 4(HighCapacityTandemTray)Tray 5(BypassTray)Tray 6(HighCapacityFeeder)EnvelopeTrayA6 105.0 148.0 LEF OA5 148.0 210.0 SEF OLEF OA4 210.0 297.0 SEF O OLEF O O O OA3 297.0 420.0 SEF O OB6 128.5 182.0 SEF OB5 182.0 257.0 SEF O OLEF OB4 257.0 364.0 SEF O O5.5 × 8.5” 139.7 215.9 SEF O OLEF O
