Xerox 5222 System Administration Manual

Also see for WORKCENTER 5222: Reference guide Service manual field

Contents

Xerox 5222 System Administration Manual Manual pdf 51 page image

Machine Information51Print ModeThis feature allows you to change the default printer mode and emulation parametersettings.For the lists of emulation parameters and their values, refer toEmulation Parametersin the Appendix chapter on page 427.1. Select [Print Mode] on the[Machine Information] screen.2. Select the required option.Off-lineTakes the printer off-line. The printer is unavailable in this mode.On-linePuts the printer on-line, ready to accept data.PCL EmulationAllows you to set parameter values for PCL emulation to print documents. For a list ofparameters, refer toPCL Emulation on page 427.1. Select [PCL Emulation] on the[Print Mode] screen.2. Enter a 3-digit parameter itemnumber in the [Item Number]field.3. Select [Change Value] to change the displayed value, or select [Confirm] if nochange is required.4. If you selected [Change Value], enter the required value in the [New Value] field.5. Select [Save].PDFAllows you to set parameter values and a password for PDF direct printing.NOTE: This feature is only available with the PostScript driver.1. Select [PDF] on the [Print Mode]screen.2. Select the required optionSetupAllows you to set emulation parameter item values for PDF direct printing. For a list ofPDF parameters, refer toPDF Direct Printing on page 430.