6 Setups66Machine Clock/TimersThis feature allows you to set the correct date, time, and other related values.1. Select [Machine Clock/Timers]in the [Features] menu.2. Change the required settings.Use the side tabs to switchbetween screens.3. Select [Close].DateSpecifies the current date. Select from three date formats: Y/M/D, M/D/Y, and D/M/Y.The date set here is printed on lists and reports.TimeSpecifies the current time. Select a 12- or 24-hour display format. If you select [12 HourClock], the buttons for specifying AM or PM are displayed. The time set here is printedon lists and reports.Time ZoneSpecifies the time zone relative to Greenwich Mean Time (GMT).Daylight SavingsSpecifies whether to automatically adjust the machine clock for Daylight Savings.Select [Adjust On] and then specify the start and end dates of the Daylight Savings timeto automatically adjust the current time when the Daylight Savings time starts and ends.NTP Time SynchronizationSpecifies the parameters used to synchronize the time of the machine with that of thespecified time server using the Network Time Protocol (NTP).NOTE: If the time server connection fails, the machine maintains its own time withoutsynchronization.• Connection to Time ServerSpecifies whether to enable the connection to a time server.• Connection IntervalSpecifies the time span between connections to the specified server, in the rangefrom 1 to 500 hours.• Time Server AddressSpecifies the IP address of the time server using the numeric keypad on the controlpanel.Auto ClearSpecifies whether to automatically display the default screen if you do not perform anyoperation within the selected period of time. Select [On] and then select the time periodin the range from 30 to 240 seconds.
