6 Setups136System Administrator’s Meter (Copy Jobs)This feature allows you to check the System Administrator’s Copy meter on the screenand to reset all System Administrator’s meters.1. Select [Accounting], and thenselect [System Administrator’sMeter (Copy Jobs)] in the[Group] menu.2. To clear the SystemAdministrator’s meters, select[Reset].3. Select [Close].Accounting TypeThis screen allows you to enable or disable the Accounting feature and to specify thetypes of jobs that require account administration.NOTE: The buttons displayed on the screen vary depending on the [Login Type]setting in [Authentication].1. Select [Accounting], and thenselect [Accounting Type] in the[Group] menu.2. Select an accounting type. Ifbuttons are displayed on theright part of the screen, selectthe required buttons to configure the detailed settings for the selected accountingtype.3. Select [Save].Accounting DisabledDisables the Accounting feature.Local AccountingEnables the Accounting feature. User registration can be performed using the touchscreen or the PC application.Network AccountingPerforms Account Administration using user information managed by an externalaccounting service on a network. User registration is performed by the external server.Xerox Standard AccountingPerforms Account Administration based on accounting users registered on themachine.When an accounting type is selected, the following buttons may appear. The buttonsdisplayed on the screen vary depending on the combination of the login type of theAuthentication feature and the accounting type.• Auditron Mode - Displays the [Auditron Mode] screen. Specify whether to performAuditron Administration for each service.
