Xerox 5222 System Administration Manual

Also see for WORKCENTER 5222: Reference guide Service manual field

Contents

Xerox 5222 System Administration Manual Manual pdf 151 page image

Selecting Transport Protocols151Selecting Transport ProtocolsWhen using the NetWare, SMB, or SNMP port, change the transport protocol ifrequired.• NetWare: IPX/SPX, TCP/IP• SMB: NetBEUI, TCP/IP• SNMP: UDP, IPX1. On the CentreWare Internet Services home page for the machine, select the[Properties] tab.2. In the [Properties] frame, select [Port Status].3. Select the required transport protocol.NetWare: IPX/SPX, TCP/IPSMB: NetBEUI, TCP/IPSNMP: UDP, IPX4. Select [Apply].Screen LayoutThe CentreWare Internet Services homepage contains four panels without visibleboundaries. You can change the left and rightpanel sizes by dragging the boundarybetween them.Header PanelDisplays the header for all pages. The headerincludes the CentreWare Internet Serviceslogo and the model of the machine. Just underthis panel on most pages is the tab bar whichcorresponds to the five functions or page buttons. These are [Status], [Jobs], [Print],[Scan], [Properties], and [Support]. You can navigate through the pages when you clickthe text on each tab.Logo PanelDisplays the company logo.Menu PanelDisplays a navigation tree, listing the items available within each category, with thecurrently displayed item highlighted.Header PanelMain PanelMenuPanelLogoPanel