Specifications423NOTE: The standard sizes of documents that can be detected vary depending on thepaper size table specified by the System Administrator. For information on setting thepaper size table, refer toPaper Size Settings in the Setups chapter on page 78.Paper SupplyNOTE: The standard sizes of documents that can be detected vary depending on thepaper size table specified by the System Administrator. For information on setting thepaper size table, refer toPaper Size Settings in the Setups chapter on page 78.Tray 1, Tray 2, and Trays 3 & 4 (Two Tray Module)Capacity: 500 sheets of 80 g/m2 (20 lb bond) paper per trayNOTE: The paper stack must not exceed 54 mm (2.1 inches) in height.Paper Weights:60 to 105 g/m 2 for Tray 160 to 215 g/m 2 for Tray 2, Trays 3 & 4, (Two Tray Module)Paper Sizes: For width: 139.7 to 297.0 mm (5.5 to 11.8”) / For length: 182.0 to 431.8mm (7.2 to 17.2”)Auto Size Sensing: YesTray 5 (Bypass)Capacity: Approx. 100 sheets**: Standard paper 4200 3R2047 20lbNOTE: The paper stack must not exceed 10 mm (0.4 inch) in height.Paper Weight: 60 to 215 g/m 2Paper Sizes: For width: 88.9 to 297.0 mm (3.6 to 11.8”) / For length: 98.4 to 431.8 mm(3.9 to 17.2”)Auto Size Sensing: YesTrays 3 & 4 (High Capacity Tandem Tray)Capacity: Approximately 2,000 sheets (800/1,200 sheets)Paper Sizes: A4 LEF, 7.25 x 10.5” LEF, 8.5 x 11” LEFPaper Weight: 60 to 215 g/m 2Tray 6 (High Capacity Feeder)Capacity: Approximately 2,000 sheetsPaper Sizes: A4 LEF, 7.25 x 10.5” LEF, 8.5 x 11” LEFPaper Weight: 60 to 215 g/m 2Double-sided ModulePaper Sizes: For width: 148.7 to 241.0 mm (5.9 to 9.6”) / For length: 98.4 to 162.0 mm(3.9 to 6.4”)Paper Weight: 60-105 g/m 2
