8 Printer Environment Settings246NOTE: If multiple parameters are specified in the first lpr command, data may not beprinted correctly.NOTE: The system default is used if no tray number is specified, or a specified tray orspecified size of paper is not loaded.NOTE: This option is for specifying paper size only. Paper is selected but thedocument size is not resized to fit the actual paper size.NOTE: If the print data specifies a paper tray, the setting takes priority over any -Coption.NOTE: If an invalid combination is specified, the machine may not operate correctly.NOTE: For some print languages, the specification may be invalid.Selecting a paper output trayThe following parameter can be specified.Selecting a paper typeThe following parameters can be specified.Specifying double-sided printingThe following parameters can be specified.NOTE: If multiple parameters are specified in an lpr command, data may not printcorrectly.NOTE: The system default is used if no parameter is specified.Parameter DescriptionSTACKER%n/stacker%n Delivers prints to a finisher tray. (%n: bin number 1)Parameter DescriptionPTS/pts Selects plain paper.PT1/pt1 Selects thick paper 1.POH/poh Selects transparency.PTP/ptp Selects tracing paper.PRC/prc Selects recycled paper.Parameter DescriptionDUP/dup Double-sided printing as follows:TUMBLE/tumble Double-sided printing as follows:SIMP/simp Single-sided printingA BC DA BC D
