10 Scanner Environment Settings284Procedure for Scan to PC Setup (FTP)1. On the control panel, select [Scan to PC].2. Enter all the information required. See the User Guide for more detailedinformation.3. Load a sample document into the document feeder.4. Press the button on the machine.5. Log on to the FTP server. Navigate to the directory path (repository) that was setup earlier on the server. Your scanned document can be found in the specifieddirectory.NOTE: If Remote Authentication has been enabled, a separate login screen appearswhen the Scan to PC (FTP) service is selected. Documents are not scanned unlessthe authentication server authenticates user access.Scan to PC Setup (SMB)Files can be scanned on the multifunction machine and routed on to a server or a clientusing the SMB protocol. Directory structures (repositories) need to be created on theserver to hold the scanned documents.Prerequisites for Scan to PC Setup (SMB)1. Confirm that an existing operational network utilizing TCP/IP is available.2. An SMB Server exists and is running.3. A repository (folder) needs to be created on the SMB server to hold the scanneddocument.4. Confirm that the following ports are enabled:1) TCP/IP Port2) SMB PortServer IP Address Required This is the IP address of the FTP server.FTP Login/password information Optional This is required if the FTP server requireslogin/password authentication. Most FTPservers require a login/password.Remote Authentication Server’s IPAddressOptional If Remote Authentication is required, thenthe Authentication feature needs to beenabled.Data to Set Up Scan to PC(FTP)InstallRequirement CommentsData to Set Up Scan to PC(SMB)InstallRequirement CommentsServer IP address Required This is the IP address of the SMB server.
