Xerox 5222 System Administration Manual

Also see for WORKCENTER 5222: Reference guide Service manual field

Contents

Xerox 5222 System Administration Manual Manual pdf 155 page image

Status155Paper TypeDisplays the type of paper loaded in each tray.PriorityDisplays the priority set for each tray when Auto Tray Switching is selected. The highestpriority is number 1. The greater the number, the lower the priority.Output DestinationTraysLists the available output trays.NOTE: Trays displayed will depend on the configuration.StatusDisplays the status of each output tray.NOTE: If the output tray becomes full, remove the stack from the output tray.ConsumablesThe consumables menu displays the status of the toner cartridge, drum cartridge, andother consumables. The status indicates when to replace each consumable.ConsumablesToner CartridgesDisplays the status of the toner cartridge as [OK], [Reorder], [Replace], or [Fault]. It alsodisplays the remaining toner in percentages.NOTE: If [Replace] is displayed, replace the toner cartridge.NOTE: Once a new toner cartridge is installed, a status will be displayed as [Ready].SMart KitsDrum CartridgesDisplays the status of the drum cartridge as [OK], [Reorder], [Replace], or [Fault]. It alsodisplays the remaining drum life in percentages.NOTE: If [Replace] is displayed, replace the drum cartridge.Staple CartridgeDisplays the status of the staple cartridge as [OK], [Reorder], [Replace], or [Fault].NOTE: If [Replace] is displayed, replace the staple cartridge.