14 Authentication and Account Administration338Server may be necessary for web User Interface Authentication, if this feature isadditionally desired.Configuring Xerox Secure Access to Work with Remote AuthenticationAt Your Workstation:1. Open your web browser and enter the TCP/IP address of the machine in the[Address] or [Location] field. Click [Enter] to access CentreWare Internet Services.2. Click the [Properties] tab.3. Expand the [Security] folder, and then click [Authentication Configuration]. The[Authentication Configuration > Step 1 of 2] page appears.4. Select [Xerox Secure Access] from the [Login Type] drop-down list.5. Click [Apply] to reboot the machine.6. Expand the [Security] folder, and then click [Authentication Configuration]. On the[Authentication Configuration > Step 1 of 2 area] page:a) Select the [Enabled] box for each service that you wish to restrict access to. Donot place a checkmark in the [Non-account Print] box if you wish to enable userswithout accounts to continue to print.b) Click [Apply], and then reboot the machine following the prompt.c) Click [Next]. The [Authentication Configuration > Step 2 of 2] page appears.7. On the [Authentication Configuration > Step 2 of 2] page, select [Configure] for[Authentication System]. The [Authentication System] page appears.Enabling Specific Xerox Secure Access Settings1. Open your web browser and enter the TCP/IP address of the machine in the[Address] or [Location] field. Click [Enter].2. Click the [Properties] tab.3. Expand the [Security] folder, and then the [Remote Authentication Servers] folder.4. Click [Xerox Secure Access Settings].5. In [Xerox Secure Access Settings]:a) Enter text into the [Default Prompt] and [Default Title] boxes to create the promptand prompt title that will be displayed on the machine’s screen informing usershow to authenticate themselves at the machine.NOTE: If the [Default Prompt] and [Default Title] have been configured on the SecureAccess server, then that information will override the information entered here.b) Select the [Enable] box for [Local Login] to allow users to log in locally to themachine.c) Select the [Enable] box for [Get Accounting Code] to get user accounting datafrom a networked Accounting Server (if used).d) Configure the [Connection Time-Out] setting.e) Click [Apply].
