8 Printer Environment Settings228NetWareThis section explains how to install the machine onto a NetWare network. The followinginformation is provided:Information Checklist – page 228NetWare Environments – page 228NetWare Installation – page 229Installation Procedure – page 229Network Communication Setup – page 230NetWare Setup – page 231Computer Setup – page 231Test Print – page 231Information ChecklistBefore installing the machine onto a network, make sure that the following items areavailable or have been performed.If problems arise during the machine installation, refer toProblem Solving on page 341.for assistance.NetWare EnvironmentsSystem configurationThe machine supports NetWare PServer mode in Bindery or NDS. NetWare 3.x/4.x/5.x/6.x is required to support Bindery. NetWare 4.11 or later is required to support NDS.In the PServer mode, the machine will function as a print server and print jobs from theprint queue. The machine uses one file server user license.NOTE: The machine does not support RPrinter mode.Item ByAn existing operational NetWare network is required. These proceduresare not designed to install a NetWare network.CustomerNetWare versions 3.x, 4.x, 5.x or 6.x CustomerObtain and record the following information, if required:• IPv4 address• Gateway address• Subnet mask• Host nameNOTE: Only the IPv4 format is available for addresses.CustomerTest the machine to make sure that it is fully installed and functioningcorrectly.CustomerInstall the print driver. Customer
