Toshiba GR200 Series Instruction Manual

Also see for GRB200: Instruction manual

6F2S1931 (0.20)Centralized GRB200(Soft: 030, 031, 032, 033, 034)- 953 -PositionEF Number of communication modulesRS485 Fiber optic 100Base-FX100Base-TX/1000Base-T1000base-LXLAN forLocal PC† IRIG-B Main-Subunitcommunication Redundancy‡SR 1(C15) 2(C11,C12) 1(C13) For PRP/HSR/RSTP†3UR 1(C15) 2(C11,C12) 1(C13) 1(C14) For PRP/HSR/RSTP†3SV 1(C15) 2(C11,C12) 1(C13) For PRP/HSR/RSTP†3UV 1(C15) 2(C11,C12) 1(C13) 1(C14) For PRP/HSR/RSTP†3†Note: ‘LAN for Local PC’ module is determined in 100Base-TX/1000-Base-T, and isdesigned for PC engineering tools. It is not designed for Network such as IEC61850,Hot-Standby, PRP, etc.‡Note: Select a LAN module designed for PRP/HSR/RSTP when the PRP/HSR/RSTPcommunication is required(“L or N” code at position E). When required the Hot-standby communication, select dual LAN modules by referring Positions E and F.Note: Module locations can be identified by positon codes in brackets. For the IED caseexamples, with regard to the stand-alone of MainUnit, a 100Base-TX/1000Base-Tmodule is mounted at C11 when “14” code is chosen at Positon E&F. To identify thelocations C11—C15 in the IED, see Figure 4.1-1 (p. 250).