Toshiba GR200 Series Instruction Manual

Also see for GRB200: Instruction manual

6F2S1931 (0.20)Centralized GRB200(Soft: 030, 031, 032, 033, 034)- 652 -HMI operationBy using the LCD screen, the operation keys and the function keys, the user can accessfunctions such as recording, monitoring, relay setting and testing.Note: The operation of the LCD screen is more or less common in all IED models.However, the contents of the LCD screen depend upon the IED model.(i) Screen and LEDs during normal HMI operationWhen the IED is operating normally, the green "IN SERVICE" LED is lit. Press any key exceptthe key CLEAR; and then the backlight of the LCD screen is turned on1. If the IED detects afault, the fault message will appear in a pop-up screen. At the same time, the “TRIP”2 LED islit.1Note: If another fault occurs during the period of time for which the previous fault pop-up screen, is displayed, the previous fault information will be overwritten by thenew fault on the pop-up screen. Press the key CANCEL to remove the pop-upscreen for “Latest Fault” to return to the previous screen.2Note: Press the key CLEAR to turn off the LED.(ii) Main-menu and Sub-menu Main-menuIf LCD screen is turned off, press any key, except the key CLEAR. “Main-Menu" willappear on the LCD screen (see the left of Figure 11.2-1). To go to the next level ofhierarchy, press the key ►. Sub-menuAn example of setting the sub-menu screen is shown in the right of Figure 11.2-1. Byusing the key ▼ and the key ▲, the user can move the cursor downward or upwardto view all of the items. By using the keys ◄ ►, the user can return to a previouslevel of hierarchy or go to the next level of hierarchy. Screen structureThe screen is composed of a title area and a data area. The title area is fixed on thetop two lines. The first line displays the screen title. The second line on the left-handside displays local time, whereas the right-hand side displays either the current linenumber, cursor position number and the maximum page number, or the item number.For example, the display “2/4” means the current cursor position, which is at thesecond item of a maximum of four items.