Toshiba GR200 Series Instruction Manual

Also see for GRB200: Instruction manual

6F2S1931 (0.20)Centralized GRB200(Soft: 030, 031, 032, 033, 034)- 466 -(iii) Error outputs with contacts and binary output circuitsAutomatic supervision function drives a contact of the power supply module (PWS)† when anerror occurs without warning; additionally, binary output circuits (BOs‡) will be locked out todrive when serious error (Level 1=Critical error) is detected.Table 9.1-4 FAIL contact, BO, LED outputs depending on levelsErrorLevelsPWS† contact outputsBO‡ locked out ErrorLEDFAIL1 terminal FAIL2 terminalScrew No. 1(N/C)Screw No. 3(N/O)Screw No. 7(N/C)Screw No. 9(N/O)0: No error Open Closed Open Closed Not locked out Off1:Serious Closed Open Closed Open Locked out On2:Serious(Comm.) Open Closed Open Closed Not locked out On3:Minor Open Closed Open Closed Not locked out On4:Alarm Open Closed Open Closed Not locked out Off5:Warning Open Closed Open Closed Not locked out OffError output by PWS contact†If serious error (Level1) is detected by Automatic supervision function, normally-closed-contact(N/C) on FAIL1 and FAIL2 terminals is closed. On the other hand, the N/O contact is open onthe serious error, as shown in Table 9.1-4.Locking out of BO circuit operation‡BO is locked out to operate, when serious error (Level1) occurs. Serious error stops trip signalgenerations to the BO circuit. When serious error is removed, the operation will be recovered.†Note:See ChapterTechnical description: Power supply module. FAIL1 (FAIL2) contactis in Form-C; terminal-screw No. 2 & 4 (8 &10) are provided with the common.‡Note:BO is discussed in ChapterTechnical description: Binary output circuit.(iv) Affection of application operation by error levelsThe error levels influence the operation of relays and general control functions.Table 9.1-5 Operation states in the IED applications affected by the error levelsLevels Relay applications Control applications Notes0: No error – –1: Serious Stopped Stopped2: Serious (Comm.) Not affected† Not affected3: Minor Not affected Stopped4: Alarm Not affected Not affected5: Warning Not affected Not affected†Note: Serious (Comm.) can be related to communication of tele-protection applications.