SINAMICS G130/G150List Manual (LH2), 04/2014, A5E03263479A 7912 Parameters2.2 List of parameters[3] = PZD 4[4] = PZD 5[5] = PZD 6[6] = PZD 7[7] = PZD 8[8] = PZD 9[9] = PZD 10[10] = PZD 11[11] = PZD 12[12] = PZD 13[13] = PZD 14[14] = PZD 15[15] = PZD 16[16] = PZD 17[17] = PZD 18[18] = PZD 19[19] = PZD 20[20] = PZD 21[21] = PZD 22[22] = PZD 23[23] = PZD 24[24] = PZD 25[25] = PZD 26[26] = PZD 27[27] = PZD 28[28] = PZD 29[29] = PZD 30[30] = PZD 31[31] = PZD 32Dependency: Refer to: r8860, r8890, r8891, r8892, r8893Notice: Where there is a multiple interconnection of a connector output, all the connector inputs must either have Integer orFloatingPoint data types.A BICO interconnection for a single PZD can only take place either on r8850 or r8860.Note: IF2: Interface 2PZD1 to PZD4 are displayed bit-serially in r8890 to r8893.Description: Selects the PZD (actual values) to be sent via interface 2 in the word format.Index: [0] = PZD 1[1] = PZD 2[2] = PZD 3[3] = PZD 4[4] = PZD 5[5] = PZD 6[6] = PZD 7[7] = PZD 8[8] = PZD 9[9] = PZD 10Note: IF2: Interface 2p8851[0...9] CI: IF2 PZD send word / IF2 PZD send wordB_INF Can be changed: U, T Calculated: - Access level: 3Data type: Unsigned32 / Integer16 Dyn. index: - Func. diagram: 2493, 9210P-Group: Communications Units group: - Unit selection: -Not for motor type: - Scaling: 4000H Expert list: 1Min Max Factory setting- - 0
