Siemens SINAMICS G150 Manual

Also see for SINAMICS G130: Operating instructions Operating instructions List manual Operating instructions Operating instructions

Contents

SINAMICS G130/G150List Manual (LH2), 04/2014, A5E03263479A 6832 Parameters2.2 List of parametersDescription: Displays the currently running cycle (including deadtime) of the multiple trace.Index: [0] = Trace 0[1] = Trace 1Dependency: Refer to: p4840, p4844Description: Sets the number of ring buffer files for the measurement results of the multiple trace.Index: [0] = Trace 0[1] = Trace 1Dependency: Refer to: p4840, r4841Description: Displays the number of OA applications installed on this drive object.Dependency: Refer to: r4951, r4952, r4955, p4956, r4957, r4958, r4959, r4960Note: DO: Drive ObjectOA: Open Architecture (OA application)Description: Displays the total length of the identifiers of the OA applications installed on this drive object.Dependency: Refer to: r4950, r4952, r4955, p4956, r4957, r4958, r4959, r4960Note: The identifier of an OA application comprises a maximum of 8 characters plus separator.r4841[0...1] MTrace cycle actual display / Cycle act displayCU_G130_DP,CU_G130_PN,CU_G150_DP,CU_G150_PNCan be changed: - Calculated: - Access level: 3Data type: Unsigned32 Dyn. index: - Func. diagram: -P-Group: Trace and function generator Units group: - Unit selection: -Not for motor type: - Scaling: - Expert list: 0Min Max Factory setting- - -p4844[0...1] MTrace ring buffer files number / Ring buff file qtyCU_G130_DP,CU_G130_PN,CU_G150_DP,CU_G150_PNCan be changed: T Calculated: - Access level: 3Data type: Unsigned16 Dyn. index: - Func. diagram: -P-Group: Trace and function generator Units group: - Unit selection: -Not for motor type: - Scaling: - Expert list: 0Min Max Factory setting10 10 10r4950 OA DO-specific number / OA DO qtyAll objects Can be changed: - Calculated: - Access level: 4Data type: Unsigned16 Dyn. index: - Func. diagram: -P-Group: OEM range Units group: - Unit selection: -Not for motor type: - Scaling: - Expert list: 1Min Max Factory setting0 16 -r4951 OA DO-specific identifier total length / OA DO id tot_lgthAll objects Can be changed: - Calculated: - Access level: 4Data type: Unsigned16 Dyn. index: - Func. diagram: -P-Group: OEM range Units group: - Unit selection: -Not for motor type: - Scaling: - Expert list: 1Min Max Factory setting0 144 -