15 Problem Solving368When a switch off/on message is displayedWhen the required printing result is not obtained- When there is no notification of errorWhen there is no message displayed on the client which has sent print request, thepossible causes, confirmation methods, and actions are as follows.- When there is no notification of printer errorA printer having the samemachine name exists on thenetwork.Switch off the machine, andthen use NWADMIN to checkthat the printer object is in thejob standby status.Use PCL Print Driver CD-ROM to specify anothermachine name.The Netware port is notactivated.Print the System SettingsList, and then check that theport is activated.Activate the Netware port.Print the System SettingsList. When using IPX/SPX,check that the networknumber remains set to00000000 (Netware serverdown). When using TCP/IP,check that the IP addressremains set to 0.0.0.0 (fixedIP address not specified) oran address supply server(DHCP server down).When using IPX/SPX, startthe Netware server. Whenusing TCP/IP, set the fixed IPaddress or start the addresssupply server (DHCP).Invalid printer configuration. Use NWADMIN orPCONSOLE to check that theprinter configuration iscorrect.*Use NWADMIN orPCONSOLE to set thefollowing items.Printer type: ParallelPort: LPT 1Printer Location: Auto Load(Local).*Cause Confirmation Method ActionA fault occurred in theNetware interface. – Switch the machine off andon.Cause Confirmation Method ActionThe specified print languageof the print job is differentfrom one specified in themachine.Check the print language ofthe machine.Specify the same printlanguage of the print job asthat of the machine.Cause Confirmation Method ActionThe user is not registered inthe Notify list of the printserver.Use PCONSOLE to checkwhether the user name orgroup name of the job isregistered.Register the user name orgroup name of the job.Cause Confirmation Method Action
