Configuration of E-mail Encryption/Digital Signature3012. Enter the machine's Internet address, beginning with “https”, into the [Address]box of your web browser to access CentreWare Internet Services.Example: https://192.168.1.1/3. Click the [Properties] tab.4. Confirm that the machine’s e-mail address (under [Description]) is filled in. To usethe E-mail service with this machine, [E-mail] has to be enabled and configured.5. Click [+] on the left of the [Security] folder to display the items in the folder.6. Click [Machine Digital Certificate Management].7. Click [Upload Signed Certificate].NOTE: When a certificate is to be imported, if the same certificate has been alreadyregistered in [Local Device] or [Others], the certificate cannot be imported. Delete theexisting certificate before importing the new one.a. Enter the password into [Password].b. Re-enter the password into [Retype Password].c. Enter the name of the file you want to import, or select the file to be imported byclicking the [Browse] button.d. Click the [Import] button. When a screen to enter a user name and passcodeappears, enter the System Administrator user ID and passcode, and then click[OK].NOTE: The default System Administrator user ID and passcode are "11111" and "x-admin" respectively.8. Refresh the web browser.9. Click [+] on the left of [Security] to display the items in the folder.10. Configure the certificate.a. Click [Certificates Management].b. Select [Local Device] for [Category], select [S/MIME] for [Certificate Purpose],and then click the [Display the List] button. If necessary, enter the SystemAdministrator user ID and passcode and click [OK].c. Place a check mark in the box in front of the certificate you wish to view detailsfor.d. Click the [Certificate Details] button.e. Click the [Use this certificate] button.f. Click [Reboot Machine]. The machine will reboot and the setting values will bereflected.11. Refresh the web browser.12. Click [+] on the left of [Security] to display the items in the folder.13. Click [SSL/TLS Settings].14. Select the [Enabled] check box for [S/MIME Communication].
