– 62 –Chapter 5 Basic Operations — KEYPinP (Picture in Picture)Select PinP as the key type to combine the background image with key fill as a sub‑screen. (The transition effect is fixed at MIX.)Since PinP uses DVE effects, the image is delayed by one frame.Setting the PinP shape[Square] (square), [Circle] (circle),[Heart] (heart), [Star] (star), or [Flower] (flower) can be selected as the shape used for combining PinP images.1 Select the / button → [KEY1] to [KEY4] → [PinP Adjust] tab.2 Select an item in [Shape] in the [Shape] column.f Select the shape for PinP.Adjusting PinPAdjusting the position and size1 Select the / button → [KEY1] to [KEY4] → [PinP Adjust] tab.2 Set [X] and [Y] in the [Position] column.f Set the PinP position.3 Set [Size] in the [Position] column.f Set the PinP size.4 Set [X], [Y], and [Z] in the [Rotation] column.f This function will be available in V2.00.00 or higher.f Set the tilt for the PinP image.f This setting is available only for [KEY1] and [KEY2].Setting [Dot by Dot]Create an actual size composition if an SD format image is used as the PinP source when the system is set to HD format. In this mode, the SD formatimage will not be up-converted so image deterioration can be prevented.f [Size] in the [Position] column is disabled.SD HDSDKey signalPinP composition1 Select the button → [SDI IN] → [Frame Buffer] tab.2 Select [Dot by Dot] in [Mode] in the [SDI IN 1] to [SDI IN 32] columns.Setting the PinP linkWhen [PinP] effects are added by another keyed in the same ME, it is possible to set an image to the values symmetrical to the axis whose coordinatesand rotation angle have been set. The image serving as the reference is the PinP image of the keyed being operated.1 Select the / button → [KEY1] to [KEY4] → [PinP Adjust] tab.2 Select an item in [Target] in the [Sync] column.f Specify the keyed to link. The keyed will not be linked when [Off] is selected. In addition, linking is possible only when the key type is PinP.3 Select an item in [Symmetry] in the [Sync] column.f Select the position that served as the reference. The image serving as the reference is the PinP image of the keyed being operated.Item Description[X] Makes the coordinates and rotation anglesymmetrical to the X axis.[Y] Makes the coordinates and rotation anglesymmetrical to the Y axis.
