Panasonic AV-HS6000 Operating Manual

Also see for AV-HS6000: Operation guide Firmware upgrade guide

Contents

Panasonic AV-HS6000 Operating Manual Manual pdf 141 page image

– 141 –Chapter 8 System Menu — Maintenance settings@@ NOTEt The function of the plug-in software initialization will be available in V2.00.00 or higher. The [with Plugin] item is not displayed.t When the settings data is initialized, video memory that has been saved to flash memory is lost. Data stored in Storage Module AV‑HS60D1 (optional)is not initialized.t The setting of date and time is not initialized. (page 142)Initializing the fader leverThe transition range of the fader lever can be initialized.f Initialization should be performed when the fader lever becomes out of adjustment by moving the installation location, etc., and transitions are notcompleted even if the fader lever has been pushed as far as it will go.1 Select the button → [MAINTENANCE] → [Boot] tab.2 Select [Fader Initial] in the [Fader Initial] column.3 Select [OK] in the confirmation screen.4 Move the fader lever back and forth once.Option status display and activationOption status displayThe option implementation status of the unit can be displayed. The [Redundant Power]/[License Status] columns will be available in V2.00.00 or higher.f Display details are as follows.[Enable] Indicates the option is enabled.[Disable] Indicates the option is disabled.1 Select the button → [MAINTENANCE] → [Option] tab.2 Check the [Mainframe], [MainPanel], [SubPanel1], and [SubPanel2] display in the [Redundant Power] column.f [SubPanel1] and [SubPanel2] will be available in V2.00.00 or higher.3 Check the [SSD] display in the [SSD] column.4 Check the [Primatte Key2], [Primatte Key3], and [Primatte Key4] display in the [License Status] column.Chromakey Software AV‑SFU60 activationChroma key functions can be added to KEY2, KEY3, and KEY4 by performing the activation process based on key code attached to ChromakeySoftware AV-SFU60 (optional). Since a package contains only one keyer, 3 packages are required to add the chroma key function to all keyers.For details on the activation method, refer to “Read before use” of the Chromakey Software AV-SFU60 (optional).@@ NOTEt This function will be available in V2.00.00 or higher.1 Select the button → [MAINTENANCE] → [Option] tab.2 Select [Serial Data File] or [Activate Data File] in the [Activate] column[Serial Data File] Saves the serial data of the unit in the memory card.[Activate Data File] Loads the activation file from the memory card.MaintenanceBackup/RestoreThis function is available only in computers connected to the terminal.f Content saved in the internal storage can be backed up and restored in the computer connected to the terminal.@@ NOTEt This function will be available in V2.00.00 or higher.Creating a backup1 Select the button → [MAINTENANCE] → [Mainte] tab.2 Select an item in the [Backup] column.f Select the target scope of the backup. Items with “l” will be backed up. Items with “―” will not be backed up.Item Resume data*1 Still Register*2 Clip Register*3 Project*4[ALL] l l l l[Resume Data] l ― ― ―