Panasonic AV-HS6000 Operating Manual

Also see for AV-HS6000: Operation guide Firmware upgrade guide

Contents

Panasonic AV-HS6000 Operating Manual Manual pdf 49 page image

– 49 –Chapter 5 Basic Operations — Wipe3 Set [Width], [Soft], and [Fill] in the [Border] column.[Width] Sets the border width.[Soft] Sets the amount of soft effect.[Fill]Select the image to fill in the border area from [Matte], [UTIL1], or [UTIL2]. When [Matte] is selected, the border color canbe set using [Hue], [Sat], [Lum], or [Color Palette] in the [Border Color] column.f [UTIL1] and [UTIL2] will be available in V2.00.00 or higher.@@ NOTEt When [Border] in the [Border] column is set to [On], the amount of soft effect set using [Soft] in the [Border] column is indicated as the ratio of softeffect to the border width. To add only soft effect to a wipe, set [Border] in the [Border] column to [Off].Setting the border colorWhen [Matte] is selected in the [Fill] column, the border color can be set.1 Select the / button → [BKGD] → [Edge Border] tab.2 Adjust the color.f Set [Hue], [Sat], [Lum], or [Color Palette] in the [Border Color] column.Setting the background image of 3D waveform@@ NOTEt This function will be available in V2.00.00 or higher.1 Select the / button → [BKGD] → [Edge Border] tab.2 Set [Base Video] in the [Base Video] column.f Select the image to fill in the background of 3D waveform from [Off] (black), [UTIL1], or [UTIL2].Modifying wipeInside the screen[Y-Pos][X-Pos]Outside the screen[100][50][0][−50][−50] [50][−100][−100] [0] [100]1 Select the / button → [BKGD] → [Position] tab.2 Select [Normal] or [Reverse] in the [Direction] column.f This setting is linked with the / button. (page 23)3 Select an item in [Normal/Reverse] in the [Direction] column.f This setting is linked with the button. (page 23)[On] Wipes in the direction of the setting item.[Off] Does not wipe in the direction of the setting item.4 Select an item in [Pattern Limit] in the [Pattern Limit] column.f This setting is linked with the button.[Off] Does not restrict the amount of wipe transition for background transition. If the setting is changed from [On] to [Off],transition is made according to the position of the fader lever at the time specified in [Return Time].[On] Restricts the amount of wipe transition for background transition.5 Set [Size] in the [Pattern Limit] column.f Set the size restriction on the amount of transition.6 Set [Return Time] in the [Pattern Limit] column.f Set the transition time to the position of the fader lever when [Pattern Limit] is set to [Off] from [On].7 Set [X‑Pos] and [Y‑Pos] in the [Wipe] column.f Set the start position of the next pattern waveform.- WIPE: 11, 12, 13, 14, 15