– 132 –Chapter 8 System Menu — Setting the Main Frame AV‑HS60U1/AV‑HS60U2Setting the Main Frame AV‑HS60U1/AV‑HS60U2Setting the ME output and DSK outputVideo signals can be output in the ME1/ME2/DSK block as shown in the following figure. Each output can be assigned to the SDI OUT signal from the button → [SDI OUT] → [Assign] tab.ME1DSK[Assign]ME1PGMME1PVWME1CLNME1KEYPVWME2PGMME2PVWDSKPGM1DSKPVW1DSKPGM2DSKPVW2ME2CLNME2KEYPVWDSK1CLNDSK2CLNDSK3CLNDSK3CLNSEL KEYPVWXPT BKGDKEY1KEY2KEY3KEY4XPT BKGDKEY1KEY2KEY3KEY4ME2DSK1 DSK2 DSK3 DSK4DSK1 DSK2 DSK3 DSK4Setting the ME1CLN/ME2CLN outputClean signals (before key effects were added) can be output. Key Out signals using key combinations can also be output.1 Select the button → [MAIN FRAME] → [ME1,2] tab.2 Select an item in [Key Select] in the [ME1 CLN]/[ME2 CLN] column.f Select the keyer from [Key1] to [Key4].3 Select an item in [CLN/KOUT] in the [ME1 CLN]/[ME2 CLN] column.[Clean] Outputs clean signals before key effects of the keyer set in [Key Select] in the [ME1 CLN]/[ME2 CLN] column wereadded.[Keyout] Outputs key signals for the keyer set in [Key Select] in the [ME1 CLN]/[ME2 CLN] column.@@ NOTEt DSK clean signals are output individually from DSK1 to DSK4.t DSK Key Out signals cannot be output.Setting the ME1KEYPVW/ME2KEYPVW outputPreview signals used exclusively for keys can be output. Set whether to output signals with added keyer key effects to the PGM background. Thepreview screen for chroma key adjustment is not output.1 Select the button → [MAIN FRAME] → [ME1,2] tab.2 Select an item in [Key1 Enable] to [Key4 Enable] in the [ME1 KEYPVW]/[ME2 KEYPVW] column.[On] Signals with added key effects of the corresponding keyer is output.[Off] No signal is output.Setting the ME1PVW/ME2 PVW outputA preview signal of the BKGD and KEY1 to KEY4 which were selected in the next transaction can be output.Select [Key1] to [Key4] from the / button on the top menu → [KEY1] to [KEY4] → [Chroma] → [Sample] → [Chroma PVW] to switch to thepreview screen for chroma key adjustment of the corresponding keyer.1 Select the button → [MAIN FRAME] → [ME1,2] tab.
