|
– 41 –Chapter 4 Preparations — Menu delegation functionMenu delegation functionWhen a button on the Control Panel is double-clicked, the menu screen displayed on the Menu Panel AV-HS60C3 or the multi-selection panel area canbe switched.At the same time, the normal operation activated when the button is pressed is also executed.Enabling/disabling the menu delegation functionEnable/disable the menu delegation function at the Menu Panel AV-HS60C3 and the multi-selection panel area separately.1 Select the button → [CTRL PANEL] → [Main Panel]/[SubPanel1]/[SubPanel2] tab.f The [SubPanel1]/[SubPanel2] tabs will be available in V2.00.00 or higher.2 Select an item in [MenuPanel] or [Select Panel] in the [Delegation] column.[On] button Enables the menu delegation function.[Off] button Disables the menu delegation function.Menu delegation function listButton Transition menu of the Menu Panel AV‑HS60C3 Transition menu of the multi‑selection panel areaButton position Operation target buttonCrosspoint area, , F/S>, f When the key type is [Lum]/[Linear]/[Full]The / button on the top menu → [KEY1] to[KEY4] → [Key Setting] tab → [Key Adjust] columnf When the key type is [PinP]The / button on the top menu → [KEY1] to[KEY4] → [PinP Adjust] tabf When the key type is [Chroma]The / button on the top menu → [KEY1] to[KEY4] → [Chroma] tab―*1 The button on the top menu → [MACRO] → [XPTAssign] tab ― in A bus* 1 The / button on the top menu → [IMAGE] →[BKGD] tab → [A Paint] column ― in B bus*1 The / button on the top menu → [IMAGE] →[BKGD] tab → [B Paint] column ―* 2 , * 2 The button on the top menu → [CBGD] →[CBGD1]/[CBGD2] tab → [Main Color] column ― - The button on the top menu → [DSK1] to[DSK4] → [Setting] tab → [DSK Adjust] column ―, The button on the top menu → [OPERATE] →[Transition] tab ― The button on the top menu → [STILL] → [Still] tab ― - *2 The button on the top menu → [STILL] → [Still] tab Selection of the register memories([STILL1] to [STILL4]) - *2 The button on the top menu → [CLIP] → [Play Clip1]to [Play Clip4] tabsSelection of the register memories([CLIP1] to [CLIP4])Transition area - The / button on the top menu → [KEY1] to[KEY4] → [Transition] tab → [In Type] column ― The / button on the top menu → [BKGD] →[Transition] tab ― The / button on the top menu → [BKGD] →[BKGD Pattern] tabSelection of the BKGD WIPEwaveform*1 The button on the top menu → [MACRO] → [MacroAttach] screen ―* 1 The button on the top menu → [OPERATE] →[MECHG] tab → [MainPanel] column ― The / button on the top menu → [BKGD] →[Position] tab → [Pattern Limit] column ― The / button on the top menu → [BKGD] →[Transition] tab ―KEY operation area - The / button on the top menu → [KEY1] to[KEY4] → [Key Setting] tab ―<1> - <4>* 1 The button on the top menu → [KEY PRESET] →[Register] tab → [Select1] column ―DSK operation area - The button on the top menu → [DSK1] to[DSK4] → [Setting] tab ―<1> - <4>* 1 The button on the top menu → [KEY PRESET] →[Register] tab → [Select1] column ―*1 This function will be available in V2.00.00 or higher.*2 Can be used when assigned to the PGM/A bus crosspoint buttons or PST/B bus crosspoint buttons.
|
