Panasonic AV-HS6000 Operating Manual

Also see for AV-HS6000: Operation guide Firmware upgrade guide

Contents

Panasonic AV-HS6000 Operating Manual Manual pdf 91 page image

– 91 –Chapter 5 Basic Operations — Video memoryVideo memoryThe unit can store and use the still image memory (Still) and the moving image memory (Clip), each in four channels. The menu screen and thethumbnail display of the multi-selection menu panel will be available in V2.00.00 or higher.f Images with key signals can be saved in the video memory (still images and moving images).f With the standard image quality, images of up to 1200 frames (approx. 40 seconds in the 1080/59.94i format) can be saved in the moving imagememory per channel. With the high image quality, images up to 600 frames (approx. 20 seconds in the 1080/59.94i format) can be saved in themoving image memory per channel.f The number of seconds which can be saved in the moving image memory varies depending on the system format (frame rate).f Data in the video memory is deleted when the power is turned off.f Data in the video memory can be saved and loaded on/from the Storage ModuleAV-HS60D1 (optional) which can be mounted on the Main FrameAV-HS60U1/AV-HS60U2, memory card, and computer connected to the terminal. (Connecting with a computer will be available in V2.00.00 orhigher.)Main Frame terminal terminalStill 1VStill 1KStill 2VStill 2KStill 3VStill 3KStill 4VStill 4KClip 1VClip 1KClip 2VClip 2KClip 3VClip 3KClip 4VClip 4KFrom XPTVMEM FVMEM STo XPTSTILL V/K 1 to 41 frame(volatile memory)CLIP V/K 1 to 4High image quality: Approx. 20 secStandard image quality: Approx. 40 sec(volatile memory)Storage Module (SSD)Still Register: Max. 48Clip Register: Max. 48(non-volatile memory)Control PanelLocal computerMemory cardStorageRecording still images (Still)Input images selected on the VMEM F/S buses can be recorded.f Image data created using a computer can be loaded.For details, refer to “Operating the register memory” (page 93).f This operation can be also performed in the multi-selection panel area.For details, refer to “Video memory menu” (page 39).1 Select the button → [STILL] → [Still] tab.2 Select [Still1] to [Still4] in [Current Still], and select [Rec] in the [Rec1] column.f When [Rec] is selected in the [Rec1] column, the source selected on the VMEM bus is recorded as still images for the selected channel.When the recording of the still images is completed, thumbnails of the still images are displayed on the thumbnail screen.Various settings when recording still images (Still)1 Select the button → [STILL] → [Still] tab.2 Select an item in [Register Store] in the [Rec1] column.f This function will be available in V2.00.00 or higher.f Specify the method to register a register memory when captured.[Manual] Select [Store] in the [Register] tab to register the frame memory of the relevant channel.[Auto] Registers the frame memory of the relevant channel in the free area in the register memory when [Rec] is selected.Continuous saving is possible by selecting [Rec] continuously.