– 31 –Chapter 4 Preparations — Basic menu operationsBasic menu operationsThis section describes basic operations of the menu. Connect with the Menu Panel AV-HS60C3 or general-purpose DVI monitor to perform menuoperations. This document is written based on the operations with the Menu Panel AV-HS60C3. Operations may differ depending on the connecteddevices.For configuration of the menu, refer to “Setting menu table” (page 158).Menu configuration and operationsMenu displayr Menu Panel AV‑HS60C39101 2 3 4 5 6 7 81112r General‑purpose DVI monitor, LAN connected computer910121 3 4 52 6 7 81 Top menuSelects the first hierarchy of the menu.2 Function menuSelects the second hierarchy of the menu. When items you want to set are not displayed, move the scrollbar to display them.3 [ALARM]When an alarm has occurred, the [ALARM] indicator area will light up red.If [ALARM] is selected, the same page as displayed with the button on the top menu → [MAINTENANCE] → [Alarm] tab will appear.4 [MACRO](This function will be available in V2.00.00 or higher.)The status for the [MACRO] indicator is as follows.f Lights up red during macro recording.f Lights up green during macro execution.If [MACRO] is selected, the same page as displayed from the button on the top menu → [MACRO] → [Macro] tab page will appear. Check[Status] in the [Macro] tab.5 Page titleDisplays the title of the displayed page. As a page title, the top menu/function menu/menu tab of the displayed page will be displayed.6 Previous screenReturns to the page of up to last 10 operations.7 Next screenMoves to the next page from the returned page.
