Panasonic AV-HS6000 Operating Manual

Also see for AV-HS6000: Operation guide Firmware upgrade guide

Contents

Panasonic AV-HS6000 Operating Manual Manual pdf 156 page image

– 156 –Chapter 10 Specifications — SpecificationsMenu Panel AV‑HS60C3Power supplyDC 12 V/0.54 A* Supplied from AV-HS60C1/AV-HS60C2 using the supplied cablePower consumption6.48 Windicates safety information. terminal Used only for the Control Panel AV-HS60C1/AV-HS60C2f Connector: DVI-Df Because an independent signal format is used, DVI-D source cannot be displayed.f Cannot be used concurrently with a DVI-D monitor connected to the terminal of the Control Panel AV-HS60C1/AV-HS60C2. Set the display selector switch of the Control Panel AV-HS60C1/AV-HS60C2 to the terminal side.Ambient operating temperature 0°C to 40°C (32°F to 104°F)Humidity 10% to 90% (no condensation)Dimensions (W×H×D) 290 mm×177 mm×46.1 mm (11-13/32 inches×6-31/32 inches×1-13/16 inches) (excluding protrusions)4RUMass AV-HS60C3: Approx. 1.7 k] (3.7 lbs.) (excluding accessories)Storage ModuleNAND Flash DriveMemory 128 GBShape mSATA JEDEC MO-300Dimensions (W×H×D) 29.85 mm×4.0 mm×50.8 mm (1-3/16 inches×5/32 inches×2 inches)Mass Approx. 7.0 ] (0.3 ozs.)f Due to device characteristics, the NAND Flash Drive is subject to data damage and overwriting restrictions.f Backup of important data is recommended. For backup method, refer to “Backup/Restore” (page 141).f When it is time for replacement, an alarm is displayed on the Menu Panel AV-HS60C3. Purchase and replace with a new one as soon as possible.(This function will be available in V2.00.00 or higher.)