– 139 –Chapter 8 System Menu — Maintenance settingsMaintenance settingsSoftware and hardware versionVersion informationInformation on the software and hardware versions of this unit can be displayed.1 Select the button → [MAINTENANCE] → [Status] tab.2 Check the [System Version] display in the [System Version] column.f Check the version of the overall system.3 Check the display of the following columns.[Main frame Soft1],[Main frame Soft2],[Main frame FPGA]Check the software and hardware version of Main Frame AV-HS60U1/AV-HS60U2.[Main Panel Soft],[Main Panel FPGA],[Main Panel CPLD]Check the software and hardware version of of the main control panel.[Sub Panel1 Soft]*,[Sub Panel1 FPGA]*,[Sub Panel1 CPLD]*Check the software and hardware version of sub control panel 1 (the second Control Panel AV-HS60C1/AV-HS60C2).[Sub Panel2 Soft]*,[Sub Panel2 FPGA]*,[Sub Panel2 CPLD]*Check the software and hardware version of sub control panel 2 (the third Control Panel AV-HS60C1/AV-HS60C2).* This function will be available in V2.00.00 or higher.UpdatesInsert the memory card on which the update files are stored into the memory card slot.For the latest information, visit the following website.http://pro-av.panasonic.net/ (English only)1 Select the button → [MAINTENANCE] → [Status] tab.2 Select an item in [Update File] in the [Update] column.f Select the file to be loaded from the file selection screen.3 Select [OK].f Start the update.AlarmIn this unit, the next alarm message will appear as a popup.For error displays, the indicator part of [ALARM] in Menu Panel AV-HS60C3 is lit in red.Alarm messageAn alarm message is displayed in Menu Panel AV-HS60C3 when an alarm has occurred.Alarm message Type of trouble Solution[ALARM! Fan Stop] Shutdown of the cooling fanThe alarm message disappears if [OK] is selected. Contactyour dealer immediately.[ALARM! Power Failure] Power supply problem[ALARM! Temperature] Rise in the temperature inside the unitAlarm status displaysThe next hardware alarm can be checked from the button → [MAINTENANCE] → [Alarm] tab page. This page can be displayed even if[ALARM] of Menu Panel AV-HS60C3 is selected.1 Select the button → [MAINTENANCE] → [Alarm] tab.2 Check the display of each item in the [Main frame]/[Main Panel]/[Sub Panel1]/[Sub Panel2] column.f The [Sub Panel1]/[Sub Panel2] columns will be available in V2.00.00 or higher.[Power 1] Displays the status of problems in the cooling fan or power inside the power supply 1.[Power 2] Displays the status of problems in the cooling fan or power inside the power supply 2.[Fan] Displays the problem status of the cooling fan. It is displayed in the [Main frame] column.[Temperature] Displays the problem status of the internal temperature.
