|
– 53 –Chapter 5 Basic Operations — KEY2 Select the transition mode.f Press the button to MIX the background image with a key.f Press the button to execute transition in the pattern selected as the wipe pattern on the menu.f Transition mode can be set separately for key in and key out.For details, refer to “Setting the key transition mode” (page 53).3 Execute the transition.f Auto transition:Press the button to automatically execute the transition using the transition time which has been set. If the button is pressedwhile the fader lever is being operated, the transition is executed in the remaining time.For details on the settings of auto transition time, refer to “Setting the transition time” (page 47).f Manual transition:Operate the fader lever to execute transitions manually. If the fader lever is operated during auto transition, auto transition will be switched tomanual operation when the fader lever position overtakes the amount of the transition being executed.f Cut transition:Press the button to execute the transition instantaneously.Setting the key transition modeTransition mode and transition time can be set separately for key in and key out.1 Select the / button → [KEY1] to [KEY4] → [Transition] tab.2 Select [MIX] or [WIPE] in the [In Type]/[Out Type] column.f Select the transition mode.3 Select an item in [Transition] in the [In Type]/[Out Type] column.[Off] Disables the transition mode of key in or key out except manual transition.[On] Enables the transition mode of key in or key out.4 Set [Time] in the [In Type]/[Out Type] column.f Set the transition time. Set the transition time as with background transitions.5 Select an item in [In=Out] in the [Out Type] column.[Off] Sets the [In Type] column and the [Out Type] column separately.[On] Matches the setting of the [Out Type] column to the setting of the [In Type] column.Operating in the KEY operation arear Operating the to buttonsPress the to buttons to execute a transition with the transition type and transition time of respective keys which havebeen set on the menu.The to buttons flicker during key in, and light when the transition is complete. If the to buttons are pressed while key in is complete, transition of the key image (key out) is executed.The to buttons light during key out, and go off when the transition is complete. If the to buttons are pressed during the transition, the transition direction is reversed.r Operating the to buttonsPress the to buttons to turn on/off respective keys with cut transition.Key wipe transitionSet the pattern and position of key wipe transition on the menu.1 Select the / button → [KEY1] to [KEY4] → [Key Pattern] tab.2 Set [In] and [Out] in the [Key Pattern] column.[In] Select the wipe pattern for key in.[Out] Select the wipe pattern for key out.3 Select an item in [Sync] in the [Key Pattern] column.[Separate] Sets the wipe patterns for [In] and [Out] separately.[Link] Matches the wipe pattern of [Out] to the wipe pattern of [In].[Direction]*Sets the wipe direction to [Normal] or [Reverse].f [Normal]: The key out pattern moves in the same direction as the key in pattern.f [Reverse]: The key out pattern moves in the opposite direction from the key in pattern.* This function will be available in V2.00.00 or higher.4 Set [X‑Pos] and [Y‑Pos] in the [Wipe In]/[Wipe Out]/[SQ In]/[SQ Out] column.
|
