– 77 –Chapter 5 Basic Operations — Internal color signalsInternal color signalsThe unit supports two lines of internal color signals.Setting the color backgroundSet the color of the color background to be used by the bus.The color can be set by setting the hue (Hue), saturation (Sat), and luminance (Lum), or by recalling the preset eight colors. The recalled colors can alsobe adjusted using [Hue], [Sat], and [Lum].Adjusting the colors1 Select the button → [CBGD] → [CBGD1]/[CBGD2] tab.2 Adjust the color.f Set [Hue], [Sat], [Lum], or [Color Palette] in the [Main Color]/[Sub Color] column.Setting the gradationSet the gradation effect for color backgrounds.Selecting the gradation effects and setting the colors1 Select the button → [CBGD] → [CBGD1]/[CBGD2] tab.2 Select an item in [Wash] in the [Wash] column.[On] Adds the gradation effect.[Off] Does not add the gradation effect.3 Select an item in [Color Type] in the [Wash] column.[Dual] Adds the two color gradation effect set in the [Main Color] and [Sub Color] columns.[Rainbow] Adds the rainbow color gradation effect.4 Adjust the color.f When [Dual] is selected, set [Hue], [Sat], [Lum], or [Color Palette] in the [Sub Color] column.f When [Rainbow] is selected, set [Rainbow Sat] and [Rainbow Lum] in the [Wash] column.Adjusting the gradation waveforms1 Select the button → [CBGD] → [CBGD1]/[CBGD2] tab.2 Select an item in [Pattern] in the [Wave] column.[Sine] Selects sine waves.[Saw] Selects sawtooth waves.3 Set [Cycle], [Phase], and [Angle] in the [Wave] column.[Cycle] Selects the gradation cycle.[Phase] Selects the gradation phase.[Angle] Selects the gradation angle.Setting the gradation movement1 Select the button → [CBGD] → [CBGD1]/[CBGD2] tab.2 Select an item in [Type] in the [Move] column.[Off] Sets no movement.[Roll] Scrolls the gradations.[Rotation] Rotates the gradations.3 Set [Speed] in the [Move] column.f Set the speed of the gradation movement.
