|
– 117 –Chapter 7 CONFIG Menu — Disabling button operationsDisabling button operationsFor each button or block, the operation can be disabled.1 Select the button → [BUTTON INHIBIT] → [MainPanel]/[SubPanel1]/[SubPanel2] tab.[MainPanel] tab Assigns the main control panel.[SubPanel1] tab* Assigns the sub control panel 1 (the second Control Panel AV-HS60C1/AV-HS60C2).[SubPanel2] tab* Assigns the sub control panel 2 (the third Control Panel AV-HS60C1/AV-HS60C2).* This function will be available in V2.00.00 or higher.2 Select the buttons/blocks to be disabled from the button/block list in the left column.f Select [Button Group] to filter the button/block list in the left column.3 Set the range of disabled operations.f Use [Group Select] and [Bus Select] to set the range of disabled operations.For details, refer to “Target button/block for [Button Group]/[Group Select]/[Bus Select] operations” (page 117).4 Select an item in [Inhibit].[Off] Enables the operation.[On] Disables the operation.5 Select [Set].r Target button/block for [Button Group]/[Group Select]/[Bus Select] operationsf The macro bus is not included in the target.Item Description[Button Group]Filters the button/block list in the left column.[All]: All[XPT-Page1]: First page of the crosspoint buttons[XPT-Page1]: Second page of the crosspoint buttons[XPT-Page1]: Third page of the crosspoint buttons[XPT-Page1]: Fourth page of the crosspoint buttons[Other]: button, <2nd PAGE>/<3rd PAGE> buttons, to buttons[Block]: ME1 block, ME2 block, DSK operation area, positioner area[Group Select]Sets the group range for disabled operations.r When the first to fourth pages of the crosspoint buttons are selected in the left column:[All+AUX]: All buses including the AUX bus[All]: All buses excluding the AUX bus[ME1]: The ME1 bus[ME2]: The ME2 busr When the button, <2nd PAGE>/<3rd PAGE> buttons are selected in the left column:[All+AUX], [All]: All[ME1]: Buttons in the ME1 block[ME2]: Buttons in the ME2 block[Bus Select]Sets details of [Group Select] when the first to fourth pages of the crosspoint buttons are selected in the left column.[All]: All in the [Group Select] setting range[A/B]: The A bus and the B bus in the [Group Select] setting range[Key]: KEY1 to KEY4 (including DSK) in the [Group Select] setting range
|
