Panasonic AV-HS6000 Operating Manual

Also see for AV-HS6000: Operation guide Firmware upgrade guide

Contents

Panasonic AV-HS6000 Operating Manual Manual pdf 118 page image

– 118 –Chapter 7 CONFIG Menu — Assigning signals to buttonsAssigning signals to buttonsExternal video input signals and internally generated signals can be assigned to the crosspoint buttons (the PGM/A, PST/B, and KEY bus crosspointbuttons) in the crosspoint area. All buses in a single Control Panel AV-HS60C1/AV-HS60C2 have a common assignment.If the assignment of the signals selected by the crosspoint buttons is changed, the positions of the lit crosspoint buttons will be changed according to thechanged assignment. In this case, the output video is not changed.1 Select the button → [XPT ASSIGN] → [MainPanel]/[SubPanel1]/[SubPanel2] tab.[MainPanel] tab Assigns the main control panel.[SubPanel1] tab* Assigns the sub control panel 1 (the second Control Panel AV-HS60C1/AV-HS60C2).[SubPanel2] tab* Assigns the sub control panel 2 (the third Control Panel AV-HS60C1/AV-HS60C2).* This function will be available in V2.00.00 or higher.2 Select the buttons to assign the video sources from the button list in the left column.f Select [Button Group] to filter the button list in the left column.3 Select a signal to be assigned from the signal list in the right column.f Select [Filter] to filter the signal list in the right column.4 Select [Assign].f The signal is assigned to the button selected in the step 2.r Signals that can be selected for the crosspoint buttons:f “l” indicates selectable, and “―” indicates non‑selectable.Signal name Description ME*1 AUX*2SDI IN1 ‑ SDI IN32 SDI input signals 1 to 32 l lDVI IN1, DVI IN2 DVI-D input signal l lME1CLN, ME2CLN Clean signal l*3 lME1KEYPVW, ME2KEYPVW Key preview video signal l* 3 lME1PGM, ME2PGM Program video signal l*3 lME1PVW, ME2 PVW Preview video signal l* 3 lDSKPGM1, DSKPGM2 Program video signal ― lDSKPVW1, DSKPVW2 DSK preview video signal ― lDSK1CLN ‑ DSK4CLN Clean signal ― lSEL KEYPVW Selected key preview video signal ― lClip 1V ‑ Clip 4V Video memory (moving image) 1 to4 videos l lClip 1K ‑ Clip 4K Video memory (moving image) 1 to4 keys l lStill 1V ‑ Still 4V Video memory (still image) 1 to 4videos l lStill 1K ‑ Still 4K Video memory (still image) 1 to 4keys l lCBGD1, CBGD2 Color background 1, 2 l lCBAR Color bar l lBlack Black image l lMV1 ‑ MV4 MultiView display output signal ― l2nd PAGE, 3rd PAGE Page switching function l* 4 l*4Blank Not assigned ― ―*1 Crosspoint buttons other than the to , , and buttons.*2 to , , and buttons.*3 ME1PGM and ME2PGM have a limitation on selection.Ex) For ME1, ME1PGM cannot be selected. When ME1PGM is selected for ME2, ME2PGM cannot be selected for ME1.*4 Used with the SHIFT function.