Panasonic AV-HS6000 Operating Manual

Also see for AV-HS6000: Operation guide Firmware upgrade guide

Contents

Panasonic AV-HS6000 Operating Manual Manual pdf 60 page image

– 60 –Chapter 5 Basic Operations — KEYKey decorationsAdd a border, shadow, or other edge to the key.Setting the key edge(Top)[Border] [Drop][Shadow] [Outline](Bottom)(Left) (Right)Fig. 1 Fig. 2[180] [225] [270][135] [315][90] [45] [0]1 Select the / button → [KEY1] to [KEY4] → [Key Setting] tab.2 Select an item in [Type] in the [Edge] column. (Fig. 1)[Off] Does not add an edge.[Border] Adds a border around the entire edge.[Drop] Adds a diagonal border.[Shadow] Adds a shadow.[Outline] Adds an outline (only a border with no fill).3 Set [Width] in the [Edge] column.f Set the edge width.4 Select an item in [Direction] in the [Edge] column. (Fig. 2)f Set the direction to add [Drop] or [Shadow] effect in 45° increments.5 Set [Density] in the [Edge] column.f Set the edge density.Setting the key edge fillSet the source to be inserted as an edge.1 Select the / button → [KEY1] to [KEY4] → [Key Setting] tab.2 Select an item in [Fill] in the [Edge] column.[Matte] Uses the color set in the [Edge Color] column.[UTIL1]* Uses the image on the UTIL1 bus.[UTIL2]* Uses the image on the UTIL2 bus.* This function will be available in V2.00.00 or higher.Setting the key edge color1 Select the / button → [KEY1] to [KEY4] → [Key Setting] tab.2 Adjust the color.f Set [Hue], [Sat], [Lum], or [Color Palette] in the [Edge Color] column.