|
– 19 –Chapter 3 Part Names and Functions — Main Frame AV‑HS60U1/AV‑HS60U2Main Frame AV‑HS60U1/AV‑HS60U2Front panel123Power supply 1Power supply 21 Alarm indicator Lights up when the cooling fan of the Main Frame AV-HS60U1/AV-HS60U2 has stopped or when there are problems (voltage declines) with thepower supply. In such cases, an alarm message is displayed on the Menu Panel AV-HS60C3. For the redundant power supply model (AV-HS60U2),an alarm will be displayed if both switches of the power supply 1 and the power supply 2 have not turned on.When an alarm has occurred, details of the problem can be checked from the button on the top menu → [MAINTENANCE] → [Alarm] tab.(page 139)Alarm status can be output from the alarm output port of the terminal on the Main Frame AV-HS60U1/AV-HS60U2 to external devices.f AV-HS60U1 does not have the alarm indicator for the power supply 2.2 Power indicator Lights up when power is input into the / terminal and also when the switches of the power supply 1 and the powersupply 2 are set to .f AV-HS60U1 does not have the power indicator for the power supply 2.3 switchTurns power on/off.f The single power supply model (AV-HS60U1) does not have the switch for the power supply 2.f When turning off the power of the redundant power supply model (AV-HS60U2), set both switches for the power supply 1 and thepower supply 2 to .@@ NOTEt When an alarm has occurred, stop using the unit immediately, and be sure to contact your dealer.Rear panel13 4 5 6 7 8 9 10 11 12 142131 to terminals (connector: BNC×32/signal: SDI IN) to terminals are equipped with color correctors.The /// terminals are equipped with up-converters.2 ‑D IN1>/‑D IN2> terminals (connector: DVI‑D×2/signal: DVI‑D IN)Connects DVI-D output devices such as a computer using DVI-D cables.f The DVI-I connector cable cannot be used.3 to terminals (connector: BNC×32/signal: SDI OUT)Assigns SDI OUT signals from the button on the top menu → [SDI OUT] → [Assign] tab. (2 distributions each) (page 112) to terminals are equipped with color correctors./ terminals are equipped with down-converters.4 terminal (connector: RJ‑45/signal: 100Base‑TX)Connects second and further Control Panels AV-HS60C1/AV-HS60C2, menu operation computers, and external devices.f Images from the Control Panel AV-HS60C1/AV-HS60C2 connected to this terminal cannot be displayed on the Menu Panel AV-HS60C3.
|
