|
– 102 –Chapter 5 Basic Operations — StorageStorageThe settings of the unit can be saved or loaded in/from three types of storage.f Memory card (optional) inserted in the memory card slot of the Control Panel AV-HS60C1/AV-HS60C2f Storage Module AV-HS60D1 (optional) which can be mounted inside the Main Frame AV-HS60U1/AV-HS60U2f Internal storage of the local computer connected to the terminal of the Main Frame AV-HS60U1/AV-HS60U2 (This function will be available inV2.00.00 or higher.)r Table of savable and loadable filesf The meanings of the symbols indicating save and load targets are as follows.- 1: Memory card (optional)- 2: Storage Module AV-HS60D1 (optional)- 3: Local computer- R: Loadable- W: Savable- ―: No save, no loadFile Save and load targets Operation menu1 2 3Project file R/W R/W R/W The button on the top menu → [PROJECT] → [SD/SSD] tabVideo memory (Still file) R/W R/W R/W The button on the top menu → [STILL] → [Register] tabVideo memory (Clip file) R/W R/W R/W The button on the top menu → [CLIP] → [Register] tabBitmap data of source name R ― ― The button on the top menu → [SOURCE NAME] →[Panel Name] tabPlug-in software* R ― ― The button on the top menu → [PLUGIN] → [List] tabUpdate file R ― ― The button on the top menu → [MAINTENANCE] →[Status] tabLog file W ― ― The button on the top menu → [MAINTENANCE] → [Alarm]tabActivation file(Serial)* W ― ― The button on the top menu → [MAINTENANCE] →[Option] tabActivation file(Activate)* R ― ―Backup data* ― ― R The button on the top menu → [MAINTENANCE] →[Mainte] tabRestore data* ― ― W* This function will be available in V2.00.00 or higher.Memory cardData can be saved and loaded in/from a memory card inserted in the memory card slot of the Control Panel AV-HS60C1/AV-HS60C2.f It may take up to 25 minutes to load moving images of a long recording time from a memory card or save them to a memory card.f While loading them from a memory card or saving them to a memory card, the menu operation is disabled. Operations other than switchingcrosspoints may be affected.r Data folder configurationData is saved in the following folders on the memory card.When data is to be loaded, first save the data in the respective folders, and then load the files.f The number of files that can be saved in each folder is limited to a maximum 100 files.File Extension Storage folderProject file*1 prj HS\COMM\PROJECTVideo memory (Still file)*2 bmp, png, jpg (jpeg), tga, tiff (tif), gif HS\COMM\IMAGEVideo memory (Clip file) clp HS\COMM\CLIPBitmap data of source name png HS\COMM\PANELPlug-in software* 3 plg HS\COMM\PLUGINUpdate file 60d HS\HS6000\UPDATELog file log HS\HS6000\LOGActivation file (Serial)*3 ― ―Activation file (Activate)*3 ― ―*1 For project files, folders with File Name are created under the HS\COMM\PROJECT top folder, and the data items are saved in the respective folders.The data items are saved with the following file names.Still1.***, Still2.***, Clip1.clp, Clip2.clp, Shot.s41, Event.e41, Setup.h41f The file formats of bitmap (bmp), JPEG (jpg), TARGA (tga), TIFF (tif), and GIF (gif) will be available in V2.00.00 or higher.*2 When the still image data with key signals attached is saved into the video memory, select “tga” or “png” as the file format. Still image data in any other fileformat cannot be saved with key signals attached.*3 This function will be available in V2.00.00 or higher.r Handling precautions for memory cardf Do not turn off the power of the unit or eject the memory card while the memory card access LED is lighting. The memory card or data in the memorycard may be damaged.
|
