Panasonic AV-HS6000 Operating Manual

Also see for AV-HS6000: Operation guide Firmware upgrade guide

Contents

Panasonic AV-HS6000 Operating Manual Manual pdf 59 page image

– 59 –Chapter 5 Basic Operations — KEY[Matte Sponge] makes the semi-transparent parts non-transparent, but does not change the color to the original color. (When the operation of [Clean FGNoise] is performed, the image returns to the original state including color information.)r [Make FG Trans]Increase transparency of the low transparency area in the foreground image.This is useful when making areas covered with thick smoke or clouds in the foreground image semi-transparent.r [Restore Detail]Decrease transparency of the high transparency area in the background image.This is useful when restoring the details of an image (such as stray hairs or smoke), which have been lost as a result of operations such as [Clean BGNoise].r [Fine Tuning]Adjust detailed images.1 Select the / button → [KEY1] to [KEY4] → [Chroma] tab.2 Select [Composite] in [View] in the [Sample] column.f Select a composite image of the background image and key.3 Select [Fine Tuning] in [Mode] in the [Sample] column.4 Set [X‑Pos], [Y‑Pos], and [Size] in the [Sample Area] column.f Set the position and size of the sample marker at the position to sample.5 After setting the sample area, select [Sampling] in the [Sampling] column.6 Set [Spill] in the [Fine Tuning] column.f Remove and restore noise.Increase the value in the plus direction to remove a large amount of noise from the foreground image, and to make the image colors approach thecomplementary color (opposite color) of the blue screen. Increase the value in the minus direction to make the image colors approach the originalforeground image.7 Set [Transition] in the [Fine Tuning] column.f Adjust the matte information for the color close to the color of the foreground image.This is useful when making areas covered with thick smoke or clouds in the foreground image semi-transparent.8 Set [Detail] in the [Fine Tuning] column.f Adjust the matte information for the color close to the color of the background image.This is useful when restoring the details of an image (such as stray hairs or smoke), which have been lost in the foreground image as a result ofsampling.Fine‑tuning the generated chroma key signalsFine-tune generated chroma key signals.1 Select the / button → [KEY1] to [KEY4] → [Chroma] tab.2 Select an item in [Narrow] in the [Adjust] column.[Off] Does not adjust the width of the chroma key signal.[0.5], [1.0], [1.5] Adjusts the width of the chroma key signal. The key signal width can be adjusted horizontally in 0.5 (half-pixel)increments.3 Set [Phase] in the [Adjust] column.f Adjust the horizontal phase of the chroma key signal. The key signal position can be adjusted horizontally in 0.5 (half-pixel) increments.