Xerox Document Centre Reference Guide Page 5 - 95. Fax (OptionalFeature)5. Fax (OptionalFeature)Pulse-to-Tone Switch [:]Use to switch from pulse dialing to tone or touch-tone dialing. Afterswitching from pulse to tone, you cannot switch back to the originalmode during the fax operation. You might need to use pulse modeto make the connection and tone mode to access a mailbox. Dial thenumber and wait for instructions. After the call is answered and thegreeting is heard, you are prompted to press 1 (or some otherdesignated character) if you are calling from a touch-tone phone.When the designated character is selected, the system switches frompulse to tone.Local ID [+] Character Check [+]This may be required as part of some international telephonenumbers (n + place of 00).Local ID [space] Character Check []This is used to improve readability. For example, adding spaces to atelephone number as 1 234 5678 instead of 12345678.Begin DTMF [*]This will allow the user to enter DTMF Dual Tone characters in afax number from the Local User Interface in a fax number.End DTMF [#]This will allow the user to end DTMF Dual Tone characters in a faxnumber from the Local User Interface in a fax number.